Foxtel X Digital, User Manual

Page: 40 / 58

Setup
Using the FOXTEL Digital set-top unit
Audio and Language Settings
The standard (default) setting for each item is marked with *.
To confirm any changes, highlight ‘Save New Settings’ then press
select , or to cancel, press back .
If you press the ‘Reset all settings’ (red) button, the settings will
change to the
standard settings ( NOT the settings made by your
installer).
Item Settings Comments
Audio output Stereo *, Mono Controls the audio output on the SCART lead.
Background music On *, Off Controls whether or not music will play while you look at
the FOXTEL Digital Guide.
Incorrect PIN signal On *, Off Controls whether or not a ‘beep’ noise will sound if you
enter an incorrect PIN.
SPDIF Output AC3 *, MPEG Controls the digital audio output from the connectors
marked ‘OPTICAL AUDIO OUT’ and DIGITAL AUDIO
OUT’. Select AC3 if your equipment has Dolby Digital
decoding capabilities. The setting ‘MPEG’ is for digital stereo
sound.
Note: Dolby Digital is only available on some programmes.
If Dolby Digital is not available, the audio output will be
digital stereo.
Preferred Language English Choose your preferred language for programmes or
channels where more than one language is available.
System Details
To see details of the digital set-top unit, including the digital set-
top unit model number, manufacturer and the FOXTEL Smartcard
number.
Signal Test
To see the quality of the signal the digital set-top unit is receiving
from the satellite or cable input.
System Test
To test external return path device, if installed.