The FOXTEL Digital set-top unit
Using the FOXTEL Digital set-top unit
v
Connections to the digital set-top unit
The diagram below shows how the digital set-top unit may be
connected up. Other connection set-ups are possible.
The dotted lines show alternative connections, for example if you
want to connect to a home cinema.
WARNINGS
Always disconnect the digital set-top unit from the power supply
before you connect it to (or disconnect it from) any other equipment.
The only way to disconnect the digital set-top unit from the power
supply is to remove the power lead. The digital set-top unit must
therefore be installed near to the power point, which should be easily
accessible.
The supplied power lead has a 2-way connector at one end and a plug
at the other. You should always insert the 2-way connector into the
digital set-top unit
before
you insert the plug into the power supply.
Do not connect the plug to the power supply until you have made
ALL the other connections.
The digital set-top unit operates with a 240 V AC, 50 Hz power supply.
Do not connect it to a DC power supply.
If you are in any doubt about the power lead, its plug or its connection,
consult a qualified electrician.
240V 50Hz
LNB IN
RS-232-C
TV
Video recorder
Home cinema or surround
sound equipment
SCART lead
SCART lead
Digital-optical
audio lead
Mains lead
Lead from
your satellite
or cable
signal input
Summary of Contents for X Digital
Page 1: ......