Setup
Using the FOXTEL Digital set-top unit
v
Using the System Settings
You shouldn’t normally need to change your System Settings as the
digital set-top unit should have been correctly set up when it was
installed.
However, the System Settings screens can be useful if, for example,
you buy a new TV and you want to make sure the digital set-top unit
makes the best use of the new TV’s features.
1.
To use the System Settings screens, press
active
on the
FOXTEL remote.
2.
Highlight ‘System Setup’, then press
select
.
3.
Highlight ‘System Settings’, then press
select
.
The System Settings screen displays on your TV.
4.
To display one of the Settings screens, highlight it and press
select
.
The details of each screen are described in the following sections.
Picture Settings
Refer to table on page 35.
The standard (default) setting for each item is marked with *.
To confirm any changes, highlight ‘Save New Settings’ then press
select
, or to cancel, press
back
.
If you press the ‘Reset all settings’ (red) button, the settings will
change to the
standard
settings (
NOT
the settings made by your
installer).
Summary of Contents for X Digital
Page 1: ......
