1. IMPORTANT GUIDELINES
REVIEW THIS GUIDE IN ITS ENTIRETY BEFORE INSTALLING YOUR
DCT411
SET TOP BOX. FOLLOW
THESE INSTRUCTIONS BEFORE CALLING SUPPORT.
2. PREPARING FOR INSTALLATION
2.1 Unpacking
Inspect the carton upon receiving and note any damage to the carton for possible unit damage.
Carton Includes:
(A)
DCT411 Quick Start Guide
(B)
DCT411 Unit
(C)
Power Adapter
(D)
HDMI Cable
p/n
DCT411 Set Top Box
Quick Start Guide
1
(B)
(A)
(C)
(D)
(E)
(F)
Full Version Users Manual is at:
http://www. Firebird-systems.com/graphics/dct411/DCT411-User-Manual.pdf
(G)
(E)
Audio/Video Cables
(F)
Remote Control
(G)
Two (2) Batteries
3. INSTALLATION
3.1 Connecting the Set-Top Box
- Remove power from the TV
- Connect the “Cable TV” cable to the “Cable In” connector on the set-top box (Figure 3.1)
- Connect the HDMI (
D
) or Video/Audio (
E
) cables to the set-top box and TV (Figure 3.2)
- Plug the TV into the power
- Plug the Power Adapter (
C
) into the set-top box and connect to the AC power outlet (Figure 3.3)
Figure 3.1
Figure 3.2
Figure 3.3
Cable TV
HDMI
Video/Audio
Power Adapter
- Change the source/input on the TV to either
HDMI or AV depending on how you connected
the TV to the set-top box
- The first time the set-top box is powered on
it
will scan for the TV channels and show the fol-
lowing screen (LEFT)
- Once the scan is completed, a display of de-
tected TV and Radio channels will appear. To
finish, press “OK” (RIGHT)
-After you have selected OK, you will be able to
view all detected channels on your TV
Rev. 043015
