112
Model D2424LV Reference Manual (Changing the Initial Settings <SETUP mode>)
Flashing
Setting the Metronome function (“Click ?” menu)
“
Setting the Metronome function
” menu allows you to determine whether or not the recorder outputs a metronome
sound from Real track (track 24) during playback or recording.
Turning the Metronome function on enables you to record your performance while playing the instrument
accompanying the metronome sound.
<Notes>
• The metronome sound is output from track 24 in the D2424LV.
• When the metronome function is switched ON, the metronome sound cannot be recorded on the output track
nor can the recorded sound be played back. However, in a D2424LV formatted in 96kHz/24bit (8 track) or
88.2kHz/24bit (8 track), as the metronome sound will be output from track 24, real tracks1-8 can all be used
for record/playback.
• Initial setting:
[Off]
• Option:
[Off]
, or
[On]
* You can turn the function on and off for each
Program individually.
* The settings cannot be saved and loaded as part of
the song data.
* The settings are maintained after you turn off the
power to the recorder.
Setting the Metronome function
1.While the recorder is stopped, press the [SETUP]
key to enter SETUP mode.
2.Turn the Jog dial to select “Click ?” (“?” flashes.),
then press the [EXECUTE/YES] key.
The current setting (“
Off
” or “
On
”) appears on the
display.
Pressing the [
EXECUTE/YES
] key lights up the flashing
“
?
” character steadily; the current setting flashes.
The initial setting is “
Off
” as shown below.
3.Turn the Jog dial to select “On” or “Off”.
Selecting “
On
” will enable the output of the metronome
sound. Selecting “
Off
” (initial setting) will disable the
metronome output.
4.Press the [EXECUTE/YES] key.
The display shows the selection (On or Off), then returns
to the indication in step 2.
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
Tempo Map
Time signature setting
Tempo setting
001 bar 4/4
005 bar 3/4
001 bar 1
= 120
003 bar 1
= 90
005 bar 3
= 60
007 bar 2
= 120
Modifying (or deleting) stored tempo settings
1.Repeat steps 1-3 described in the “Storing a tempo
value” section.
2.Turn the Jog dial to select bar/beat to edit or delete.
3.Turn the Shuttle dial so that the flashing cursor is
on the TEMPO number.
4.Use the Jog dial to enter a new value.
Entering “- - -” deletes the data at the selected bar/beat.
5.Press the [EXECUTE/YES] key.
6.Press the [STOP] button or the [EXIT/NO] key
repeatedly to exit SETUP mode.
4
4
4
3
Tempo=120
Tempo=90
Tempo=60
Tempo=120
