Model D2424LV Reference Manual (Saving and Loading Song Data)
102
Saving of “WAV” files
A WAV file is saved by the following procedure. Before proceeding to save, make sure a DOS
formatted disk in FAT 16 is set in the SCSI equipment. The following explains the procedures for
using a backup disk after it had been formatted.
The E-IDE hard disk (or optional DVD-RAM drive) for backup can be used by the same procedures
at saving in the DOS formatted disk.
1.The SETUP mode is entered by pressing the
[SETUP] key.
2.Select “Save PGM?” (“?” flashes) with the Jog dial
and press the [EXECUTE/YES] key.
The currently setup content will flash in the display.
3.Select the flashing “SCSI *” with the Jog dial and
press the [EXECUTE/YES] key. (Select "IDE2"
when saving in the E-IDE hard disk or optional
DVD-RAM disk.)
After displaying "
drive name
", the display will change to
"
Bkup Mode?
" for selecting the backup mode ("
WAVE
"
will flashes).
4.Select the backup mode "WAVE" with the Jog dial
and press the [EXECUTE/YES] key.
The display will change to "
CB Export? OFF
" ("
OFF
"
flashes) and ON-OFF of the clip board export can be
setup.
< Please remember! >
When clip board export is set to ON, save is to be
executed only on data within a desired range.
In such a case, the desired range must be registered by
the CLIPBOARD IN and CLIPBOARD OUT points previous
to executing save. For explanation on registering of
CLIPBOARD IN/OUT points, refer to "Registering of the
locate point (=editing point)" on page 51.
5.Select "OFF" and press the [EXECUTE/YES] key.
The display will change to selecting the program for
saving.
6.Select the desired program with the Jog dial and
press the [EXECUTE/YES] key.
The display will change to selecting the track to be saved.
In the initial state, "
All Trk
" will flashes.
If the
Jog
dial is rotated at this stage, in addition to
"
All Trk
" (flashing), "
01 01
" (flashing)-"
56 56
" (flashing)
can be selected. This function is used when specifying
any desired track and saving it.
7.After selecting the track, press the [EXECUTE/YES]
key.
If "
All Trk
" or any desired track was selected, the display
will change to the following.
When "All Trk" is selected:
The display will change to making a new WAV file on
the disk and "
SURE?
" will flashes.
Normally, when saving ABS 0-REC END data, proceed to
the next step while the setup is OFF.
But, under the following condition, save is executed with
the setup ON.
When the
Jog
dial is rotated, "
Eject
" can be selected.
To eject the disk, select "
Eject
" and press the [
EXECUTE/
YES
] key.
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
For example, if tracks 5-24 must be saved, "
05 05
" is
selected. Then proceed to the following.
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
SURE?
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
SURE?
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
