10
Final assembly
1. Place the bottom cover near the inverter housing.
2. Install the supplied communication cables in the corresponding ports.
3. Set the bottom cover in place. Then, secure it using the same screws that were removed in the previous steps.
4.3 Other communications
The inverter supports several forms of communication.
A. USB
Port used for connection with a PC.
Insert the supplied CD into the computer and follow the on-screen instructions to install the monitoring software. For the
detailed software operation, refer to the digital user manual from the download section of the product website.
B. Serial (RS-232)
Port used to allow communication between the inverter and a PC. Insert the supplied CD into the computer and follow
the on-screen instructions to install the monitoring software. For the detailed software operation, please check the
digital user manual from the download section of the product website.
C. Auxiliary contacts
There is a set of dry contacts (3 amperes, 250 VAC) on the rear panel, which are controlled by battery and charging
voltage. These terminals can serve as a switch for auxiliary devices to indicate low voltage and other situations.
Summary of Contents for Fusion FIO-F11K12P
Page 56: ......
