Fortinet Fortiwifi fortiwifi-60, Administration Manual

Page: 44 / 394

44
01-28006-0014-20041105 Fortinet Inc.
Interface System network
Figure 5: Interface list
Interface settings
Interface settings displays the current configuration of a selected FortiWiFi interface or
VLAN subinterface. Use interface settings to configure a new VLAN subinterface or to
change the configuration of a FortiWiFi interface or VLAN subinterface.
Create New Select Create New to create a VLAN.
Virtual Domain Select a virtual domain to display the interfaces added to this virtual domain.
Only available if you have added a virtual domain.
Name The names of the physical interfaces available to your FortiWiFi unit.
• Interface names indicate the default function of the interface (For
example, internal and wan1)
• By default, interface names that include ha are configured with an HA
heartbeat device priority (see “Priorities of Heartbeat Device” on page 94 )
• The modem interface is available if a modem is connected to the USB
port (see “Configuring the modem interface” on page 59 )
If you have added VLAN subinterfaces, they also appear in the name list,
below the physical interface that they have been added to. See “VLAN
overview” on page 63 .
IP The current IP address of the interface.
Netmask The netmask of the interface.
Access The administrative access configuration for the interface.
See
“To control administrative access to an interface” on page 52 for
information about administrative access options.
Status The administrative status for the interface.
If the administrative status is a green arrow, the interface is up and can
accept network traffic. If the administrative status is a red arrow, the
interface is administratively down and cannot accept traffic. To change the
administrative status, select Bring Down or Bring Up. For more information,
see “To bring down an interface that is administratively up” on page 50 and
“To start up an interface that is administratively down” on page 50 .
Delete, edit, and view icons.