Fortinet Fortiwifi fortiwifi-60, Administration Manual

Page: 283 / 394

VPN CLI configuration
FortiWiFi-60 Administration Guide 01-28006-0014-20041105
283
config vpn ipsec vip
edit <vip_integer>
unset <keyword>
end
config vpn ipsec vip
delete <vip_integer>
end
get vpn ipsec vip [<vip_integer>]
show vpn ipsec vip [<vip_integer>]
Example
The following commands add IPSec VIP entries for two remote hosts that can be
accessed by a FortiWiFi unit through an IPSec VPN tunnel on the
external
interface
of the FortiWiFi unit. Similar commands must be entered on the FortiWiFi unit at the
other end of the IPSec VPN tunnel.
config vpn ipsec vip
edit 1
set ip 192.168.12.1
set out-interface external
next
edit 2
set ip 192.168.12.2
set out-interface external
end
This example shows how to display the settings for the
vpn ipsec vip
command.
get vpn ipsec vip
This example shows how to display the settings for the VIP entry named
1
.
get vpn ipsec vip 1
This example shows how to display the current configuration of all existing VIP
entries.
show vpn ipsec vip
ipsec vip command keywords and variables
Keywords and variables Description Default Availability
ip <address_ipv4>
The IP address of the destination
host on the destination network.
0.0.0.0
All models.
out-interface
<interface-name_str>
The name of the FortiWiFi interface to
the destination network.
null
All models.
Note: Typing
next
lets you define another VIP address without leaving the vip shell.