Fortinet Fortiwifi fortiwifi-60, Administration Manual

Page: 307 / 394

IPS Anomaly
FortiWiFi-60 Administration Guide 01-28006-0014-20041105
307
Anomaly CLI configuration
(config ips anomaly) config limit
Access the
config limit
subcommand using the
config ips anomaly
<name_str>
command. Use this command for session control based on source and
destination network address. This command is available for
tcp_src_session
,
tcp_dst_session
,
icmp_src_session
,
icmp_dst_session
,
udp_src_session
,
udp_dst_session
.
You cannot edit the
default
entry. Addresses are matched from more specific to
more general. For example, if you define thresholds for 192.168.100.0/24 and
192.168.0.0/16, the address with the 24 bit netmask will be matched first.
Command syntax pattern
config limit
edit <name_str>
set <keyword> <variable>
end
config limit
edit <name_str>
unset <keyword>
end
config limit
delete <name_str>
Example
Use the following command to configure the limit for the
tcp_src_session
anomaly.
config ips anomaly tcp_src_session
config limit
edit subnet1
set ipaddress 1.1.1.0 255.255.255.0
set threshold 300
end
end
Note: This guide only covers Command Line Interface (CLI) commands that are not
represented in the web-based manager. For complete descriptions and examples of how to use
CLI commands see the
FortiGate CLI Reference Guide .
Note: This command has more keywords than are listed in this Guide. See the FortiGate CLI
Reference Guide for a complete list of commands and keywords.
limit command keywords and variables
Keywords and variables Description Default Availability
ipaddress
<address_ipv4mask>
The ip address and netmask of the
source or destination network.
No
default.
All models.
threshold
<threshold_integer>
Set the threshold that triggers this
anomaly.
No
default.
All models.