manualshive.com logo in svg

Fortinet Fortiwifi fortiwifi-60, Administration Manual

Share
Download
Fortinet Fortiwifi fortiwifi-60 Administration Manual Download Page 243

Users and authentication 

LDAP

FortiWiFi-60 Administration Guide

01-28006-0014-20041105

 243

The FortiWiFi unit supports LDAP protocol functionality defined in RFC2251 for 
looking up and validating user names and passwords. FortiWiFi LDAP supports all 
LDAP servers compliant with LDAP v3.

FortiWiFi LDAP support does not extend to proprietary functionality, such as 
notification of password expiration, that is available from some LDAP servers. 
FortiWiFi LDAP support does not supply information to the user about why 
authentication failed.

LDAP server list

Figure 120:LDAP server list

LDAP server options

Figure 121:LDAP server configuration

Create New

Add a new LDAP server.

Server Name/IP

The domain name or IP address of the LDAP server.

Port

The port used to communicate with the LDAP server.

Common Name 
Identifier

The common name identifier for the LDAP server. 20 characters maximum. 

This is the 

Distinguished 
Name

The distinguished name used to look up entries on the LDAP server. It 

reflects the hierarchy of LDAP database object classes above the Common 

Name Identifier.
The Delete and Edit icons.

Name

Enter a name to identify the LDAP server.

Server Name/IP

Enter the domain name or IP address of the LDAP server.

Server Port

Enter the port used to communicate with the LDAP server.
By default LDAP uses port 389.

Summary of Contents for Fortiwifi fortiwifi-60











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands