Fortinet Fortiwifi fortiwifi-60, Administration Manual

Page: 107 / 394

System config SNMP
FortiWiFi-60 Administration Guide 01-28006-0014-20041105
107
To add an SNMP community
1 Go to System > Config > SNMP v1/v2c .
2 Select Create New.
3 Enter a Community Name to identify the SNMP community.
4 Configure Hosts, Queries, Traps, and SNMP Events.
5 Select OK.
FortiWiFi MIBs
The FortiWiFi SNMP agent supports FortiWiFi proprietary MIBs as well as standard
RFC 1213 and RFC 2665 MIBs. RFC support includes support for the parts of RFC
2665 (Ethernet-like MIB) and the parts of RFC 1213 (MIB II) that apply to FortiWiFi
unit configuration.
The FortiWiFi MIBs are listed in Table 8 . You can obtain these MIB files from Fortinet
technical support. To be able to communicate with the SNMP agent, you must
compile all of these MIBs into your SNMP manager.
Your SNMP manager might already include standard and private MIBs in a compiled
database that is ready to use. You must add the Fortinet proprietary MIBs to this
database. If the standard MIBs used by the Fortinet SNMP agent are already
compiled into your SNMP manager you do not have to compile them again.
Table 8: FortiWiFi MIBs
MIB file name or RFC Description
fortinet.2.80.mib
The Fortinet MIB is a proprietary MIB that includes detailed FortiWiFi
system configuration information. Add this MIB to your SNMP
manager to monitor all FortiWiFi configuration settings. For more
information about FortiWiFi MIB fields, see “FortiWiFi MIBs” on
page 107 .
fortinet.trap.2.80.mib The Fortinet trap MIB is a proprietary MIB that is required for your
SNMP manager to receive traps from the FortiWiFi SNMP agent. For
more information about FortiWiFi traps, see “FortiWiFi traps” on
page 108 .
RFC-1213 (MIB II) The FortiWiFi SNMP agent supports MIB II groups with the following
exceptions.
No support for the EGP group from MIB II (RFC 1213, section 3.11
and 6.10).
Protocol statistics returned for MIB II groups (IP/ICMP/TCP/UDP/etc.)
do not accurately capture all FortiWiFi traffic activity. More accurate
information can be obtained from the information reported by the
Fortinet MIB.
RFC-2665 (Ethernet-
like MIB) The FortiWiFi SNMP agent supports Ethernet-like MIB information
with the following exception.
No support for the dot3Tests and dot3Errors groups.