Fortinet Fortiwifi fortiwifi-60, Administration Manual

Page: 208 / 394

208
01-28006-0014-20041105 Fortinet Inc.
Service Firewall
Configuring address groups
To organize addresses into an address group
1 Go to Firewall > Address > Group .
2 Select Create New.
3 Enter a group name to identify the address group.
4 Select an address from the Available Addresses list and select the right arrow to move
the address into the group.
5 Repeat step 4 as required to add more addresses to the group.
6 Select OK.
To delete an address group
If an address group is included in a policy, it cannot be deleted unless it is first
removed from the policy.
1 Go to Firewall > Address > Group .
2 Select the Delete icon beside the address group you want to delete.
3 Select OK.
To edit an address group
1 Go to Firewall > Address > Group .
2 Select the Edit icon beside the address group you want to modify.
3 Make any required changes.
4 Select OK.
Service
Use services to determine the types of communication accepted or denied by the
firewall. You can add any of the predefined services to a policy. You can also create
custom services and add services to service groups.
This section describes:
• Predefined service list
• Custom service list
• Custom service options
• Configuring custom services
• Service group list
• Service group options
• Configuring service groups
Note: To change the address group name you must delete the address group and add it with a
new name.