FORTEZA JSC
FORTEZA FM-30(24)-BT
Please visit our internet sites:
12
27,5-30 m
9.2 The DETECTION ZONE LIMITATION or the “APPROVED PASSAGES”, i.e.
the
subzone disconnection is performed with a PC.
If the corresponding subzone is switched OFF, the sensor does not generate an alarm if
the detection zone is crossed in this place.
CAUTION!
Avoid the adjustment of very high sensitivity to eliminate false alarms!
To reduce the quantity of false alarms, switch ON the subzones which are necessary for
its application.
10 ADJUSTMENT WITH A PC
10.1 The sensor can be adjusted with a PC. It provides an opportunity to form a complex
detection zone, set complex sensitivity and visually assess the level of noise and signal.
The sensor connection with a PC is realized with standard connective cable USB A-USB B.
To control the sensor with a computer, it is necessary to set up the software, which includes
2 stages: virtual COM-port installation and sensor control program installation.
10.2 COM-port installation
Put the disc (of the delivery kit) in the computer. Connect the sensor to the computer with
the USB cable. Apply power to the sensor. The computer will identify the type of the USB
device and will ask to install the driver. For that follow the fig. 10.1-10.4.
