FORTEZA JSC
FORTEZA FM-30(24)-BT
Please visit our internet sites:
Fig. 11.11
By setting of sensitivity it is not allowed any movements of things or objects in the detection
zone except of the operator making the control passages.
The first operator makes control passages in the second half of every subzone and the second
one achieves a sure alarm generating with special regulators, while the signal level should be
approximately the same in all subzones and be 90 ... 10% of the height of the column.
The control passages should be done "at full height" and "bent over" with a minimum and
maximum speed (0.3 ... 8 m / s).
After adjusting the sensitivity, the level of interference in any subzone should not exceed
20% of the height of the column.
