manualshive.com logo in svg

formlabs Fuse 1, Manual

Share
Download
formlabs Fuse 1 Manual Download Page 40

38

To cool the build chamber in the Fuse Sift:

1.  Check the status of the build chamber on the touchscreen. If the build chamber graphic 

and icon are highlighted red and the touchscreen displays the status 

Hot

, allow the build 

chamber to continue cooling before ejecting the cake.

2.  When the touchscreen displays the status 

Cool

, it is safe to recover and process your 

printed parts.

Once the build chamber has been allowed ample time to cool down outside of the 
print enclosure, parts can be removed using the Fuse Sift. For further instructions on 
cooling the build chamber, unpacking a cake, and extracting parts, refer to section 
5 Recovering powder and filling powder cartridges in the Fuse Sift manual or visit 
support.formlabs.com.

5.6 

Managing the machine

For detailed guidance and visual assistance, visit 

support.formlabs.com

.

During and between printing, you can track your printer’s usage, manage print jobs, and 
prepare for future print jobs.

5.6.1 

Registering on Dashboard

Dashboard (

formlabs.com/dashboard

) allows individuals and teams to remotely monitor 

Formlabs devices, track material usage, and explore past and future Formlabs purchases. 
Register the Fuse 1 to Dashboard through the touchscreen. Once the printer is registered 
to Dashboard and 

Dashboard Logging

 is enabled on the printer, the Fuse 1 sends data to 

Dashboard as long as the printer’s Wi-Fi or Ethernet connections are able to access the internet.

5.6.2 

Starting an uploaded print
To start an uploaded print job on the touchscreen:

1.  Confirm the build chamber, optical cassette, and required powder have been loaded into 

the printer.

2.  Tap the print job from the 

Jobs

 screen.

Refer to section 

5.4.5 Starting a print

 for more information.

5.6.3 

Deleting an uploaded print job
To delete an uploaded print job on the touchscreen:

1.  Tap the print job from 

Jobs

.

2.  Tap 

Delete

. If prompted, tap 

Delete

 again to confirm.

5.6.4 

Turning off

The Fuse 1 is designed to remain powered on when not in use. Flip the breaker switch on the 
back of the unit to the 

OFF

 position to turn off the machine completely and conserve power. 

When moving or storing the machine, unplug the unit from its power source in addition to 
flipping the breaker switch.

NOTICE

Summary of Contents for Fuse 1

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands