manualshive.com logo in svg

formlabs Fuse 1, Manual

Share
Download
formlabs Fuse 1 Manual Download Page 23

Preparation and setup  | 

21

4 

Preparation and setup

4.1 

Location and environs 

Prepare a space to install and operate the Fuse 1 and house the necessary accessories and consumables.

To prepare the workspace:

1.  Choose a location separate from any machinery or tooling that generates dust or sparks, 

such as wood or metal working equipment.

2.  The Fuse 1, its stand, build chamber, and powder cartridge are free standing components. 

Reserve the following minimum dimensions for the most convenient access:

 •

Fuse 1

: 149.5 × 125.5 × 187.0 cm (59.0 × 49.4 × 73.6 in)

 °

The Fuse 1 footprint is 68.5 × 64.5 × 107.0 cm (27.0 
× 25.4 × 42.0 in), 165.5 cm (65.0 in) with stand. 
Leave at least 20.0 cm (8.0 in) to the left of the 
printer and 61.0 cm (24.0 in) to the front and right 
of the printer free for access.

 °

Place the Fuse 1 at least 20.0 cm (8.0 in) from 
nearby walls.

 •

Fuse Sift

: 221.1 × 122.0 × 218.0 cm (87.1 × 48.0 × 85.8 in)

 °

The Fuse Sift footprint is 99.1 × 61.0 × 157.0 cm (39.0 
× 24.0 × 61.8 in). With the hood open, the Fuse Sift is 
188.8 cm (74.3 in) in height. Leave at least 61 cm (24 in) 
to the left, front, and right of the unit free for access.

 °

Place the Fuse Sift at least 20.0 cm (8.0 in) from 
nearby walls.

 °

Do not overlap with the Fuse 1 access footprint by 
more than 30.5 cm (12.0 in).

3.  Ensure proper ventilation is installed.

Sintering nylon powder produces laurolactam; a white powder that accumulates 
within the print enclosure, filter mediums, and exhaust. Proper ventilation is required 
whenever the Fuse 1 or Fuse Sift is operating.

4.  Purchase additional supplies:

 •

Alconox cleaning agent

 •

Compliant vacuum that is grounded and bonded (e.g., Class II, Division 2 vacuum)

 •

Distilled water

 •

Ethanol (laboratory-grade)

 •

Non-reactive nitrile gloves

 •

Particulate filtering respiratory protection (NA95 or better)

 •

PEC*PADs (disposable lint-free microfiber cloths)

 •

Polyester cloth swabs (disposable lint-free polyester cloth swabs with either orange or 
blue plastic handles)

 •

Safety glasses

CAUTION

Summary of Contents for Fuse 1

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands