formlabs Fuse 1, Manual

Page: 25 / 64

Preparation and setup | 23
Removing the machine from its packaging requires at least two people that are
comfortable lifting large and heavy objects.
To unbox the machine:
1. Position the packaging near the designated area, leaving enough room for two people to
comfortably maneuver throughout the area. Stand the packaging upright to ensure it is level.
2. Locate the box containing the stand and assemble the stand according to the included
instructions. Check that the stand is level before unboxing the printer.
3. Position the assembled stand in the printer’s designated area with the front facing towards
the operator. An arrow on the stand’s instructions indicates the front.
4. Open the printer’s box from the top by removing the lid, then consecutively remove the
two C-shaped shells from the left and right sides, and then remove the protective pad from
the top of the printer.
5. Open the hopper and remove the power cable, lifting straps, cleaning accessories, optical
cassette, and safety insert packed inside.
6. Loop both orange lifting straps under the machine from left-to-right, ensuring that the straps
are not crossed. With one person on each side, insert your forearms into each loop so they
do not go past your elbows.
7. With your back straight and knees slightly bent, brace against the machine with your palms
as you and a second person lift the unit up.
8. Carefully move the printer onto the stand, keeping the four feet aligned with the
corresponding recesses on the stand.
If you need to readjust the machine, use the lifting straps to pick it back up. Do not
pick up the machine without lifting straps.
9. Remove any additional wrapping and packaging from outside of the printer before
connecting the machine to power.
The original packaging is designed to be kept and reused for transporting or shipping the
machine for service. Save the complete packaging including any inserts for your convenience.
4.4 Accessing the serial name
For detailed guidance and visual assistance, visit support.formlabs.com .
The serial name is a unique identifier used to track the history of manufacturing, sales, and
repair.
The serial name for the Fuse 1 is located on a sticker next to the A/C input on the back panel in
the format
AdjectiveAnimal . For a Fuse 1, the serial name is also available on the touchscreen.
To access the serial name on the touchscreen:
1. Tap the wrench icon on the
Home screen. The Settings screen appears.
2. Tap System . The System screen appears.
3. Tap Details . The Details screen appears.
4. The serial name is listed in the top-left corner.
CAUTION
CAUTION
NOTICE