formlabs Fuse 1, Manual

Page: 16 / 64

14
3 Safety
Read and understand this manual and its safety instructions before using the Fuse 1.
Failure to do so can result in serious injury or death.
Supervise young or inexperienced users to ensure enjoyable and safe operation.
The instructions contain warnings and safety information, as explained below:
DANGER indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury.
WARNING indicates a hazard with a medium level of risk which, if not avoided, could result in death or
serious injury.
CAUTION indicates a hazard with a low level of risk which, if not avoided, could result in minor or
moderate injury.
NOTICE indicates information considered important, but not hazard-related.
DANGER: Ethanol is a flammable chemical.
DANGER: CLASS 4 INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED AVOID
EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION
WARNING: Class 1 laser product. Only remove the exterior paneling of the printer with authorization
from Formlabs Support or a certified service provider .
ENVIRONMENTAL HAZARD: Unsintered SLS powder is classified as a microplastic, a group of
plastics that are hazardous to aquatic life. .
MANDATORY ACTION: Refer to instruction manual/booklet.
MANDATORY ACTION: Wear a respirator (N95 or better).
MANDATORY ACTION: Wear thermal-insulating silicone gloves when handling hot build chambers.
MANDATORY ACTION: Disconnect before carrying out maintenance or repair.
MANDATORY ACTION: Grounding required.
WARNING
DANGER
WARNING
CAUTION
NOTICE