manualshive.com logo in svg

Ford 2010 F-250, Owner'S Manual

The Ford 2010 F-250 Owner's Manual is a comprehensive guide for this powerful truck, providing essential information on maintenance, operation, and safety features. Easily accessible to all, this manual is available for free download on our website manualshive.com. Get all the details you need to keep your Ford F-250 in top condition.

Share
Download
background image

OK:

Use in various menu selections.

If your vehicle is equipped with a Family Entertainment System (FES)
please refer to the

Family entertainment DVD system

section later in

this chapter.

7.

SHUFFLE:

In CD/MP3 mode,

press SHUFFLE to engage shuffle
mode. SHUFFLE ON will appear in
the display. If you wish to engage shuffle mode right away, press SEEK
to begin random play. Otherwise, random play will begin when the
current track is finished playing. CD SHUF will appear in the display. To
disengage, press SHUFFLE again. SHUFFLE OFF will appear in the
display.

Note:

In track mode, all tracks on the

current

disc will shuffle in

random order. In MP3 folder mode, the system will randomly play all
tracks within the current folder.

8.

FOLDER

: In folder mode,

press FOLDER

to access next

folder on MP3 discs, if available.

9.

FOLDER:

In folder mode,

press

FOLDER to access the

previous folder on MP3 discs, if
folders are available.

10.

FF (Fast forward):

Press FF

to manually advance in a CD/MP3
track.

11.

REW (Rewind):

Press REW to

manually reverse in a CD/MP3 track.

12.

Memory presets:

To set a

station: Select frequency band
AM/FM1/FM2; tune to a station,
press and hold a preset control until sound returns. You may store up to
six stations in each frequency band for a total of 18.

In satellite radio mode (if equipped)

, there are 18 available presets,

six each for SAT1, SAT2 and SAT3. To save satellite channels in your
memory presets, tune to the desired channel then press and hold a
preset control until sound returns.

Satellite radio is available only with a valid SIRIUS

威

radio

subscription. Check with your authorized dealer for availability.

Entertainment Systems

56

2010 F-250/350/450/550

(f23)

Owners Guide, 2nd Printing
USA

(fus)

Summary of Contents for 2010 F-250

























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 F-250

Kia CADENZA 2019 Features & Functions Manual preview
CADENZA 2019
Brand: Kia Pages: 54
Metra Electronics 99-9001 Installation Instructions preview
99-9001
Brand: Metra Electronics Pages: 2
Ford 2004 Navigator Owner'S Manual preview
2004 Navigator
Brand: Ford Pages: 368
ULTIMATE SPEED 279746 Assembly And Safety Advice preview
279746
Brand: ULTIMATE SPEED Pages: 6
Yakima Prorack K436 Fitting Instructions Manual preview
Prorack K436
Brand: Yakima Pages: 13
Volvo V70 2014 Quick Manual preview
V70 2014
Brand: Volvo Pages: 16
Feniex QUAD QSM-8101 Manual preview
QUAD QSM-8101
Brand: Feniex Pages: 4
Haltech Platinum Pro Plug-in Quick Start Manual preview
Platinum Pro Plug-in
Brand: Haltech Pages: 20
Prorack K138 Fitting Instructions Manual preview
K138
Brand: Prorack Pages: 14
Chamberlain LiftMaster Professional 975LMC Owner'S Instructions preview
LiftMaster Professional 975LMC
Brand: Chamberlain Pages: 2
Thule 157 Mounting & Installation preview
157
Brand: Thule Pages: 1
Philips DLA72004 Brochure preview
DLA72004
Brand: Philips Pages: 2
IPRO RH519 User Manual preview
RH519
Brand: IPRO Pages: 28
Crux Sightline VIMCF-93C Quick Start Manual preview
Sightline VIMCF-93C
Brand: Crux Pages: 2
Crux Sightline RVCAD-81B Manualline preview
Sightline RVCAD-81B
Brand: Crux Pages: 10
Truma Mover XT Operating Instructions Manual preview
Mover XT
Brand: Truma Pages: 10
Truma Mover SX Operating And Installation Instructions preview
Mover SX
Brand: Truma Pages: 92
Rosco Mor-Vision STSK1030 Installation & User Manual preview
Mor-Vision STSK1030
Brand: Rosco Pages: 9

Brands by name

Popular brands

Load more brands