manualshive.com logo in svg

Ford 2010 F-250, Owner'S Manual

The Ford 2010 F-250 Owner's Manual is a comprehensive guide for this powerful truck, providing essential information on maintenance, operation, and safety features. Easily accessible to all, this manual is available for free download on our website manualshive.com. Get all the details you need to keep your Ford F-250 in top condition.

Share
Download
background image

Points to Remember:

•

Remember to adjust gain setting before using the TBC for the first
time.

•

Readjust GAIN setting on the TBC (according to procedure above)
whenever road, weather and trailer or vehicle loading conditions
change from those that existed when the gain was initially set.

•

The sliding lever on the TBC should be used only for manual
activation of trailer brakes to assist with proper adjustment of the
GAIN. Misuse, such as application during trailer sway, could cause
instability of trailer and/or tow vehicle.

•

Avoid towing in adverse weather conditions. The TBC does not
provide anti-lock control of the trailer wheels. Trailer wheels can
lock-up on slippery surfaces, resulting in reduced stability of trailer
and tow vehicle.

•

The TBC interacts with the brake system of the vehicle, including
ABS, in order to reduce the likelihood of trailer wheel lockup.
Therefore, if these systems are not functioning properly the TBC may
not function at full performance.

•

When the vehicle is turned off, the TBC Output is disabled and the
display is shut down. Reactivation of the ignition from OFF to ON will
awaken the TBC module.

•

The TBC is only a factory or dealer installed item. Ford is not
responsible for warranty or performance of the TBC due to misuse or
customer installation.

•

Do not attempt removal of the TBC without consulting the

Workshop Manual.

Damage to the unit may result.

Trailer lamps

Trailer lamps are required on most towed vehicles. Make sure all running
lights, brake lights, turn signals and hazard lights are working. Contact
your authorized dealer or trailer rental agency for proper instructions
and equipment for hooking-up trailer lamps.

Driving while you tow

When towing a trailer:

•

Do not drive faster than 70 mph (113 km/h) during the first 500 miles
(800 km) of trailer towing and don’t make full-throttle starts.

•

Consult your local motor vehicle speed regulations for towing a trailer.

Tires, Wheels and Loading

259

2010 F-250/350/450/550

(f23)

Owners Guide, 2nd Printing
USA

(fus)

Summary of Contents for 2010 F-250

























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 F-250

Cadillac SRX 2012 Instructions preview
SRX 2012
Brand: Cadillac Pages: 3
Cadillac Escalade 2021 Features Manual preview
Escalade 2021
Brand: Cadillac Pages: 12
Cadillac CTS 2008 Navigation System Owner'S Manual preview
CTS 2008
Brand: Cadillac Pages: 106
Cadillac CTS 2008 Customer Convenience/Personalization Manual preview
CTS 2008
Brand: Cadillac Pages: 20
Cadillac ATS 2014 Convenience/Personalization Manual preview
ATS 2014
Brand: Cadillac Pages: 20
Cadillac ATS 2013 Owner'S Manual preview
ATS 2013
Brand: Cadillac Pages: 326
Cadillac CTS 2012 Quick Manual preview
CTS 2012
Brand: Cadillac Pages: 28
Cadillac ESCALADE - BROCHURE 2009 Owner'S Manual preview
ESCALADE - BROCHURE 2009
Brand: Cadillac Pages: 602
Cadillac ESCALADE ESV 2004 Owner'S Manual preview
ESCALADE ESV 2004
Brand: Cadillac Pages: 20
Cadillac ESCALADE EXT 2005 Owner'S Manual preview
ESCALADE EXT 2005
Brand: Cadillac Pages: 460
Cadillac CT6 SUPER CRUISE 2018 Convenience/Personalization Manual preview
CT6 SUPER CRUISE 2018
Brand: Cadillac Pages: 8
Cadillac XT6 2023 Manual preview
XT6 2023
Brand: Cadillac Pages: 20
Cadillac LYRIQ 2023 Owner'S Manual preview
LYRIQ 2023
Brand: Cadillac Pages: 337
Vauxhall Cascada Quick Reference Manual preview
Cascada
Brand: Vauxhall Pages: 2
BGS technic 40108 Manual preview
40108
Brand: BGS technic Pages: 5
Oldsmobile 1999 88 Owner'S Manual preview
1999 88
Brand: Oldsmobile Pages: 344
ABL eMH3 Installation Manual preview
eMH3
Brand: ABL Pages: 66
Streetwize LeisureWize EMOVE EM303A Manual preview
LeisureWize EMOVE EM303A
Brand: Streetwize Pages: 20

Brands by name

Popular brands

Load more brands