Programming spare keys
A maximum of eight keys can be coded to your vehicle. Only
SecuriLock
威
keys can be used. To program a
coded key
yourself, you
will need two previously programmed
coded keys
(keys that already
operate your vehicle’s engine) and the new unprogrammed key(s) readily
accessible for timely implementation of each step in the procedure.
If two previously programmed coded keys are not available, you must
bring your vehicle to your authorized dealer to have the spare coded
key(s) programmed.
Please read and understand the entire procedure before you begin.
1. Insert the first previously
programmed
coded key
into the
ignition and turn the ignition from
the 1 (off) position to the 3 (on)
position (maintain ignition in the 3
(on) position for at least one
second, but no more than
10 seconds).
2. Turn ignition from the 3 (on)
position back to the 1 (off) position
in order to remove the first
coded
key
from the ignition.
3. After three seconds but within 10 seconds of removing the first
coded
key,
insert the second previously programmed
coded key
into the
ignition and turn the ignition from the 1 (off) position to the 3 (on)
position (maintain ignition in the 3 (on) position for at least one second
but no more than 10 seconds).
4. Turn the ignition from the 3 (on) position back to the 1 (off) position
in order to remove the second
coded key
from the ignition.
5. After three seconds but within 10 seconds of removing the second
coded key,
insert the new unprogrammed key (new key/valet key) into
the ignition and turn the ignition from the 1 (off) position to the 3 (on)
position (maintain ignition in the 3 (on) position for at least one second,
but no more than 10 seconds). This step will program your new key to a
coded key.
Locks and Security
161
2010 F-250/350/450/550
(f23)
Owners Guide, 2nd Printing
USA
(fus)
