Ford 2010 F-250 Owner'S Manual Download Page 37 | Manualshive

Page: 37 / 408

background image

9. The compass is now calibrated.

Note:

If the RESET button is pressed or three minutes has expired, the

display will go back to the INFO menu and will show CAL instead of the
compass heading until the compass is calibrated.

PARK AID (if equipped)

This feature sounds a warning tone to warn the driver of obstacles near
the rear bumper, and functions only when R (Reverse) gear is selected.

Press and hold the SELECT/RESET stem to turn this feature on or off.
(You can also choose to turn this feature on/off when the vehicle is
placed in reverse.)

Press the SELECT/RESET stem for the next setup menu item or wait for
more than four seconds to return to the info menu.

LANGUAGE = ENGLISH / SPANISH / FRENCH

Allows you to choose which language the message center will display in.
Selectable languages are English, Spanish, or French.

Waiting four seconds or pressing the RESET button cycles the message
center through each of the language choices.

Press and hold the RESET button for two seconds to set the language
choice.

System warnings

System warnings alert you to possible problems or malfunctions in your
vehicle’s operating systems.

In the event of a multiple warning situation, the message center will
cycle the display to show all warnings by displaying each one for four
seconds.

The message center will display the last selected feature if there are no
more warning messages.

Types of messages and warnings:

•

Some messages will appear briefly to inform you of something you
may need to take action on or be informed of.

•

Some messages will appear once and then again when the vehicle is
restarted.

•

Some messages will reappear after clearing or being reset if a problem
or condition is still present and needs your attention.

•

Some messages can be acknowledged and reset by pressing RESET.
This allows you to use the full message center functionality by clearing
the message.

Instrument Cluster

37

2010 F-250/350/450/550

(f23)

Owners Guide, 2nd Printing
USA

(fus)

«
...
35
36
37
38
39
...
»

Summary of Contents for 2010 F-250

























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 F-250

Brand: AccuAir Pages: 40

Brand: Peak Pages: 10

Brand: Lincoln Pages: 424

Brand: Volkswagen Pages: 26

Brand: iDataLink Pages: 99

Brand: Axxess Pages: 4

Brand: Vintage Air Pages: 14

Brand: Buick Pages: 428

Gasoline/Electric DS Golf Car 1996

Brand: Club Car Pages: 48

Brand: JKS Pages: 3

Brand: Hyundai Pages: 11

Brand: Softride Pages: 4

Brand: Subaru Pages: 540

RearSight 250-8308

Brand: Rostra Pages: 2

Brand: TrailFX Pages: 2

INDICA eV2 XETA CNG

Brand: TATA Motors Pages: 24

Brand: PAC Pages: 5

Brand: Percon Pages: 49

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands