manualshive.com logo in svg

Ford 2009 Edge, Owner'S Manual

The Ford 2009 Edge Owner's Manual is a comprehensive guide that provides detailed information and instructions on operating and maintaining your vehicle. Easily downloadable for free at manualshive.com, this manual helps you understand the features and functions of your Ford 2009 Edge to ensure a smooth and enjoyable driving experience.

Share
Download
background image

Note:

Inspect the wheel pilot hole

prior to installation. If there is
visible corrosion in wheel pilot hole,
remove loose particles by wiping
with clean rag and apply grease.
Apply grease only to the wheel pilot
hole surface by smearing a “dime”
(1 square cm) sized glob of grease
around the wheel pilot surface (1)
with end of finger. DO NOT apply
grease to lugnut/stud holes or
wheel-to-brake surfaces.

JUMP STARTING

WARNING:

The gases around the battery can explode if

exposed to flames, sparks, or lit cigarettes. An explosion could

result in injury or vehicle damage.

WARNING:

Batteries contain sulfuric acid which can burn skin,

eyes and clothing, if contacted.

Do not attempt to push-start your automatic transmission
vehicle. Automatic transmissions do not have push-start
capability. Attempting to push-start a vehicle with an automatic
transmission may cause transmission damage.

Preparing your vehicle

When the battery is disconnected or a new battery is installed, the
automatic transmission must relearn its shift strategy. As a result, the
transmission may have firm and/or soft shifts. This operation is
considered normal and will not affect function or durability of the
transmission. Over time, the adaptive learning process will fully update
transmission operation.

1.

Use only a 12–volt supply to start your vehicle.

2. Do not disconnect the battery of the disabled vehicle as this could
damage the vehicle’s electrical system.

3. Park the booster vehicle close to the hood of the disabled vehicle
making sure the two vehicles

do not

touch. Set the parking brake on

both vehicles and stay clear of the engine cooling fan and other moving
parts.

Roadside Emergencies

258

2009 Edge

(edg)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for 2009 Edge






































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 Edge

OEM Audio Reference Series Manual preview
Reference Series
Brand: OEM Audio Pages: 29
iArmor IA-N179 Manual preview
IA-N179
Brand: iArmor Pages: 6
Blue Giant STRONGARM RVR303 Installation & Technical Manual preview
STRONGARM RVR303
Brand: Blue Giant Pages: 48
Farad BARS PR25 - 2 Quick Start Manual preview
BARS PR25 - 2
Brand: Farad Pages: 8
Blue Ox BX3781 Installation Instructions Manual preview
BX3781
Brand: Blue Ox Pages: 7
Shad NADSA ATV80 Owner'S Manual preview
NADSA ATV80
Brand: Shad Pages: 3
EUFAB 12015 Manual preview
12015
Brand: EUFAB Pages: 12
Phonocar 4/084 Mounting Instructions preview
4/084
Brand: Phonocar Pages: 2
Kuda 079020 Installation Instruction preview
079020
Brand: Kuda Pages: 2
GMC TopKick 2007 Owner'S Manual preview
TopKick 2007
Brand: GMC Pages: 430
Draw tite 77971 Installation Instructions preview
77971
Brand: Draw tite Pages: 4
Club Car TransPorter 4 Maintenance And Service Manual preview
TransPorter 4
Brand: Club Car Pages: 286
Feniex QUAD QSM-8101 Manual preview
QUAD QSM-8101
Brand: Feniex Pages: 4
AUTOTECH 10.109.405K Installation Instructions preview
10.109.405K
Brand: AUTOTECH Pages: 2
Chevrolet 2012 Malibu Owner'S Manual preview
2012 Malibu
Brand: Chevrolet Pages: 376
UCANDAS VDM Instruction Of Quick Operation preview
VDM
Brand: UCANDAS Pages: 4
Camcar Walmec 40102 Manual preview
Walmec 40102
Brand: Camcar Pages: 6
BMW 330e Touring xDrive G21 2021 Owner'S Handbook Manual preview
330e Touring xDrive G21 2021
Brand: BMW Pages: 102

Brands by name

Popular brands

Load more brands