manualshive.com logo in svg

Ford 2009 Edge, Owner'S Manual

The Ford 2009 Edge Owner's Manual is a comprehensive guide that provides detailed information and instructions on operating and maintaining your vehicle. Easily downloadable for free at manualshive.com, this manual helps you understand the features and functions of your Ford 2009 Edge to ensure a smooth and enjoyable driving experience.

Share
Download
background image

training to ensure that all children ages 0 to 16 are properly restrained in
the correct restraint system. Ford recommends checking with a NHTSA
Certified Child Passenger Safety Technician (CPST) and your
pediatrician to make sure your seat is appropriate for your child and
properly installed in the vehicle. To locate a child seat fitting station and
CPST contact the NHTSA toll free at

1-888-327-4236

or on the internet

at http://www.nhtsa.dot.gov.

Follow all the safety restraint and airbag precautions that apply to adult
passengers in your vehicle.

If the child is the proper height, age, and weight (as specified by your
child safety seat or booster manufacturer), fits the restraint and can be
restrained properly, then restrain the child in the child safety seat or
with the belt-positioning booster. Remember that child seats and
belt-positioning boosters vary and may be designed to fit children of
different heights, ages and weights. Children who are too large for child
safety seats or belt-positioning boosters (as specified by your child safety
seat manufacturer) should always properly wear safety belts.

SAFETY SEATS FOR CHILDREN

Infant and/or toddler seats

Use a safety seat that is recommended for the size and weight of the
child.

When installing a child safety seat:

•

Review and follow the information
presented in the

Airbag

supplemental restraint system
(SRS)

section in this chapter.

•

Carefully follow all of the
manufacturer’s instructions
included with the safety seat you
put in your vehicle. If you do not
install and use the safety seat
properly, the child may be injured
in a sudden stop or collision.

Airbags can kill or injure a child in a child seat. NEVER place a
rear-facing child seat in front of an active airbag. If you must use a
forward-facing child seat in the front seat, move the vehicle seat all the
way back.

Seating and Safety Restraints

168

2009 Edge

(edg)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for 2009 Edge






































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 Edge

Camcar 2155 Fitting Instructions preview
2155
Brand: Camcar Pages: 2
Camcar 40052 Mounting Instructions preview
40052
Brand: Camcar Pages: 6
iDataLink maestro Rr Install Manual preview
maestro Rr
Brand: iDataLink Pages: 106
Jeep Cherokee 16 1982 Technical & Service Manual preview
Cherokee 16 1982
Brand: Jeep Pages: 1311
Cequent 10417 Instruction Sheets preview
10417
Brand: Cequent Pages: 9
Spiral Audio KT-FI001PB Nstallation Instructions preview
KT-FI001PB
Brand: Spiral Audio Pages: 2
Thule Kit 2161 Fitting Instructions preview
Kit 2161
Brand: Thule Pages: 2
Saab 2008 9-5 Owner'S Manual preview
2008 9-5
Brand: Saab Pages: 288
Sunsky S-GPS-0142 User Manual preview
S-GPS-0142
Brand: Sunsky Pages: 9
BMW M5 2014 Service And Warranty Information preview
M5 2014
Brand: BMW Pages: 38
M7 SPEED AGS-R2 Manual preview
AGS-R2
Brand: M7 SPEED Pages: 6
Volvo S90 2018 Quick Manual preview
S90 2018
Brand: Volvo Pages: 42
ULTIMATE SPEED 279619 Instructions For Use And Safety Manuallines preview
279619
Brand: ULTIMATE SPEED Pages: 40
Mercedes-Benz Vito Taxi 2011 Operation Manual preview
Vito Taxi 2011
Brand: Mercedes-Benz Pages: 10
Cadillac 2001 Eldorado Owner'S Manual preview
2001 Eldorado
Brand: Cadillac Pages: 335
EUFAB 12014 Manual preview
12014
Brand: EUFAB Pages: 20
Phonocell 6/821 Mounting Instructions preview
6/821
Brand: Phonocell Pages: 8
Autoplugin RCP-B1 Installation Manual preview
RCP-B1
Brand: Autoplugin Pages: 8

Brands by name

Popular brands

Load more brands