Ford 2009 Edge Owner'S Manual Download Page 93

Page: 93 / 325

Power Liftgate (if equipped)

This feature allows users to open/close the rear liftgate at the touch of a
button.

1. To disable/enable the power
liftgate feature, select this function
from the SETUP control for the
current display mode.

2. Press the RESET control to turn
the power liftgate ON or OFF.

Reverse Sensing System (Park aid) (if equipped)

This feature sounds a warning tone to warn the driver of obstacles near
the rear bumper, and functions only when R (Reverse) gear is selected.

1. To disable/enable the reverse
sensing system feature, select this
function from the SETUP menu or
put the vehicle in R (Reverse).

2. Press the RESET control to turn
the rear park aid OFF or ON.

Language

1. Select this function from the
SETUP menu for the current
language to be displayed.

2. Pressing the RESET control
cycles the message center through
each of the language choices.

Selectable languages are English, Spanish and French.

3. Press and hold the RESET
control for two seconds to set the
language choice.

System warnings

System warnings alert you to possible problems or malfunctions in your
vehicle’s operating systems.

Driver Controls

2009 Edge

(edg)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for 2009 Edge






































































































































































































































































































































Search results

Summary of Contents for 2009 Edge

Reviews:

Related manuals for 2009 Edge

Brands by name

Popular brands

Ford 2009 Edge, Owner'S Manual

Search results

Summary of Contents for 2009 Edge

Reviews:

Related manuals for 2009 Edge

Brands by name

Popular brands