19
2-3-6. MFR-2SDOGB
The MFR-2SDOGB is a 12G/3G-SDI output card. Its Gearbox function enables conversion
between 12G-SDI and Quad Link 3G-SDI signals, and between 2SI and SQD signals.
Max. 8 cards can be installed into slot Nos.
09-16
.
► See Sec. 2-1-1. “Matrix Size Chart.”
The following listed SDI signals can be input.
12G-SDI:
Max. 2 outputs (BNC 1A, 2A)
3G-SDI:
Max. 8 outputs
► See Sec. 2-1-1. “Matrix Size Chart.”
1
A
1
B
1
C
1
D
2
A
2
B
2
C
2
D
12G / 3G-SDI
12G / 3G-SDI
BNC x 8 Outputs (12G/3G-SDI)
Set up output signals in the Web-based Control Software as shown below.
Gearbox settings
Open the [Web-based Control:
(Main Unit Settings)
－
Gearbox Settings
page].
This page allows you to specify input/ output signals to Gearbox, reference signal and delay.
Destination Name
Open the [Web-based Control: (
Router System Settings)
－
Destination Name
page.].
This page allows you to change destination names displayed on Remote Controllers or other
devices.
Source Assignment
Open the [Web-based Control: (
Router System Settings)
－
Destination Assignment
page].
This page allows you to assign physical outputs to logical output channels.
