40
5-2. Available Conversions
MFR-2SDIGB / 2SDOGB
cards allow following input/output conversions.
From
To
Lock
Delay(H)
(*3)
Total Delay
(*4)
Ancillary Data
12G-SDI
3G Quad (2SI)
Line lock
(*1)
0.3H to 1H
0 frame + ** (H)
Through
Mask
Genlock
0.3H to 1H
0 frame + ** (H)
1 frame + Delay (H)
0.5H to 1H
1 frame + 0H
12G-SDI
3G Quad (SQD)
Line lock
(*1)(*2)
Genlock
0.3H to 1H
1 frame + Delay (H)
3G Quad (2SI)
3G Quad (SQD)
3G Quad (SQD)
3G Quad (2SI)
0.5H to 1H
1 frame + 0H
3G Quad (2SI)
12G-SDI
Line lock
(*1)
0.3H to 1H
0 frame + ** (H)
Genlock
0.3H to 1H
0 frame + ** (H)
1 frame + Delay (H)
0.5H to 1H
1 frame + 0H
3G Quad (SQD)
12G-SDI
Line lock
(*1)(*2)
Genlock
0.3H to 1H
1 frame + Delay (H)
(*1)
SDI signal input to the A connector is used as reference. When Line Lock is selected on MFR-2SDOGB
cards, video signals are synchronized by inputting signals to all four channels in Gearboxes.
(*2)
Available only on Gearbox 1.
(*3)
Delay (H)
and
Total Delay (H)
indicate amount of delay and their settings correspond to the following
adjustable ranges.
(*4)
If
Total Delay
(frame) is set to “
0 frame
” for both Gearboxes, the
different Total Delay (H)
setting is
available for the Gearboxes.
If
Total Delay
(frame) is set to “
1 frame
” for either one or both Gearboxes, the
same Total Delay (H)
setting is required, accordingly:
1 frame + 0H
or
1 frame + Delay (H)
.
Delay (H) Setting
Adjustable range
Delay (H) Setting
Adjustable range
0.3H
-0.8H to +0.2H
0.8H
-0.3H to +0.7H
0.4H
-0.7H to +0.3H
0.9H
-0.2H to +0.8H
0.5H
-0.6H to +0.4H
1H (1)
-0.5H to +0.5H
0.6H
-0.5H to +0.5H
1H (2)
-0.1H to +0.9H
0.7H
-0.4H to +0.6H
5-3. Conversion Settings
In the WebGUI, specify the Gearbox input and output formats, and then assign input/output
physical channels to logical channels. Use Link Settings that allow simultaneous 4-channel
operation and facilitate crosspoint switches.
5-3-1. Converting 3G SQD input to 2SI (MFR-2SDIGB)
MFR-2SDIGB
MFR-4000
routing
Gearbox 1
Quad Link
3G-SDI
(SQD)
Quad Link
3G-SDI
(2SI)
