67
Appendix 3. Installation/ Replacement of
MFR-PSA (Option)
3-1. How to Install a New MFR-PSA
The following procedure shows how to install a new MFR-PSA.
1.
Unfasten to remove four fixing screws along the front panel and detach the front panel.
2.
Turn off the POWER2 power supply switch.
3.
Remove the screw and detach the power supply unit fixing
plate.
4.
Confirm that the MFR-PSA is facing correct direction and firmly insert the unit.
5.
Lay down the MFR-PSA handle.
6.
Re-install the plate and screw detached in Step 3.
7.
Turn on the POWER2 power supply switch.
8.
Verify that the AC and DC LEDs on the MFR-PSA lights
green.
9.
Re-install the front panel.
MFR-PSA installation is now complete.
D
C
A
C
A
C
D
C
‚c
‚b
‚`‚
b
‚`‚
b
‚c
‚b
3.
2.
The slot to install an MFR-PSA
Handle
7.
8.
5.
