41
1.
Open the
Gearbox Settings
page in the WebGUI and select signal formats under
From
and
To
as shown below for a Gearbox in the MFR-2SDIGB card block. (This
example sets Gearbox 1 on the Slot 1 card.)
2.
Open the
Source Assignment
page in the WebGUI and assign the physical
channels (
SDI1-4
) to logical channels (
SRC 1-4
).
3.
Use a remote control unit or the Crosspoint page in the WebGUI to assign output
channels to
SRC1-4
.
5-3-2. Converting 2SI to SQD Output (MFR-2SDOGB)
1.
Open the
Gearbox Settings
page in the WebGUI and select signal formats under
From
and
To
as shown below for a Gearbox in the MFR-2SDOGB card block. (This
example sets Gearbox 1 on the Slot 9 card.)
2.
Open the
Destination Assignment
page in the Web GUI and assign the physical
channels (
SDI1-4
) to logical channels (
DST 1-4
).
3.
Use a remote control unit or the Crosspoint page in the WebGUI to assign input
channels to
DST1-4
.
MFR-2SDOGB
MFR-4000
routing
Gearbox 1
Quad Link
3G-SDI
(2SI)
Quad Link
3G-SDI
(SQD)
