FOR-A MFR-16, Operation Manual

Page: 14 / 90

14
No. Item Description
A
POWER Power status.
BUSY Displays the flash memory writing status of backup settings.
LOCK
Lock status.
► See Sec. 6-3. "Lock" for details on the lock function.
► See table on next page for details on LED color indications.
B SETUP
Displays Setup menu that allows you to set IP address and other
settings.
► See Sec. 5-6. 5-7, 5-8, 5-9, 5-10, 5-11 "Setup Menu" for SETUP
menu details.
C RESET Initializes the remote control unit.
D Buttons
All buttons are user assignable.
*1)
7-color selectable button name indication (red, green, yellow,
blue, white, cyan or magenta) (hereafter called LCD)
*2)
3-color selectable button illumination (red, green or orange)
*3)
Green illumination
E NAME DISPLAY
7-color selectable button name/assignment indications (red, green,
yellow, blue, white, cyan or magenta)
F MENU Displays setting menus and status.
G CONTROL Operates menu settings.
H CANCEL Cancels menu settings.
I
PAGE A /
LOCK PANL
Switches pages.
Pressing the button switches Page 1 and Page 2 of Group A.
Button is unlit when Page 1 is current.
Button is lit orange when Page 2 is current.
To use the button as LOCK LOCAL, press and hold down (for 3
seconds).
(*)
J
PAGE B /
LOCK DEST
Switches pages.
Pressing the button switches pages of Group B.
Button is unlit when Page 1 is current.
Button is lit orange when Page 2 is current.
To use the button as LOCK ALL, press and hold down (for 3
seconds).
(*)
K Display Displays crosspoints and button assignments.
L
↑
Up / Down buttons, select displayed items on Display operation.
M
↓
N ENTER Confirms settings on Display operation.
O FUNCTION Function assignable buttons. (Light green)
P PAGE A When enabled, Group A pages can be changed using CONTROL .
Q PAGE B When enabled, Group B pages can be changed using CONTROL .
R LOCK Lock functions assignable button.
S
Current DEST
button
Displays the current destination channel.
T
Current SRC
button
Displays the current source channel.
U
Current PAGE
display
Displays the current page.
(*)
PAGE Switch and LOCK features are initially enabled and can be disabled in the [Web-Based Control:
Assign Function page], respectively.