24
Enable/disable Inhibit
1.
Select a destination or source.
2.
Click
Inhibit Free
to enable or disable inhibit.
Enabled: Black letters
Disabled: Grayed out letters
3.
Click
Send
.
4-5. Salvo
The Salvo page allows you to register Salvos to a remote control unit.
Storing Front Panel Salvo Data
1.
Select enabled/disabled for each level
(Enabled: yellow, Disabled: gray)
2.
Click
Setting
to start storing salvo.
3.
Specify the salvo number. (Max 100)
4.
Input the salvo name in
Name
.
5.
Select crosspoints to save as a salvo. Up
to 5,120 salvos with 256 max. crosspoints
per salvo can be registered.
Clicking
Copy
loads current crosspoints.
(If current destination channel is 257 and
over,
Copy
does not function.)
6.
Select the destination channels to save.
The selected channels are highlighted
yellow.
7.
Click
Entry
. The salvo is stored.
Clicking
Cancel Select
cancels destination channels selection.
Deleting a crosspoint
▼
By selecting a destination channel
1.
Click a destination channel to delete, which turns gray.
2.
Click the
Entry
button. Only yellow-highlighted destination channels are registered.
▼
By using the
Delete
button
1.
Click the
Stop Set
button to stop salvo storing.
2.
Click the
Delete
button.
3.
The
Delete
button and crosspoints are highlighted yellow. Click a crosspoint from among
those highlighted. Click the
Delete
button to exit Delete mode.
4.
Click the
Setting
button.
5.
Click required destination channels to highlight them yellow.
6.
Click the
Entry
button.
