36
Destination Button LCD Indication
Destination channel names are ordinarily displayed on the LCDs above destination buttons.
MFR-18RU, 18RUA, 16RUTA and 8RUA can also display source channel names that are selected
for destinations. To display source channel names, set the menu under
Display Setting
in the
[Web-Based Control:
RU Settings
page]. LCD indications can also be switched using the
Display
Mode
button.
In the case of multi-level breakaway switching, the name of the level with the smallest number is
displayed.
MFR-18RU/18RUA
MFR-16RUTA
MFR-8RUA
POWER
BUSY
SETUP
LOCK
RESET
REMOTE CONT ROL UNIT
MFR-8RUA
5-4. MODE Button and Mode Menu
(MFR-18RU/18RUA/39RU/39RUA/16RUTA/8RUA)
5-4-1. Outline
The
MODE
button allows you to switch Mode Menu. By switching Mode Menu settings,
displayed MENU and LCD items, and items using
CONTROL
(rotary selector) are switched.
(Supported only for MFR-18RU/18RUA/39RU/39RUA/16RUTA/8RUA.)
Each Mode menu can be enabled or disabled. Only enabled Mode menu items can be
switched and displayed by pressing the
MODE
button. Set unused mode menu items to
disabled to allow for easier mode searches.
Multiple buttons can be assigned to
MODE
buttons. If multiple
MODE
buttons are assigned, a
MODE
button is highlighted and the corresponding LCD background illuminates when it is
pressed.
POW ER
BUSY SETUP
LOCK RESET
MFR-18RU
REMOTE CONTROL UNIT
MFR-16RUTA
REMOTE CONTROL UNIT
LOCK
POWER
BUSY
PAGE A
LOCK
SETUP
RESET
PAGE B
