61
3.
Turn
CONTROL
to change the value to
101
. To clear the number setting, press and hold
down the button.
4.
When a number is changed, the
SAVE
button blinks. Press and hold down
SAVE
to
confirm the change. The remote control unit will automatically restart.
To cancel the process, press other button (A to C) without pressing
SAVE
.
5-10-3. Rebooting MU PC-LAN
1.
Press button
C
in
Setup Menu
mode.
2.
Press and hold down the
REBOOT
button shown below. The
EXEC
display appears.
3.
Press and hold down the button under
EXEC
to reboot MU PC-LAN. The "PC-LAN
” and
“Startup" messages are displayed during rebooting and disappears when the reboot is
complete.
*
Disabled if connecting to MFR-4000 units.
5-11. Setup Menu (MFR-8RUA)
The
SETUP
button allows you to enter
Setup Menu
mode, in which RU and MU PC-LAN network
settings are displayed, the MU PC-LAN port can be rebooted, and RU network settings can be
changed. The left two buttons are used to select information to be displayed or the PC-LAN reboot.
The third button from the left is used to switch network information display. To exit
Setup Menu
mode, press the
SETUP
button again.
Selection buttons
(See the figures below)
LAN Port
Display / Execution
Button A
Remote Control Unit (RU)
IP address display and change
Subnet mask display
PC-LAN on Main Unit (MU)
IP address display
Subnet mask display
Default gateway display
Button B
PC-LAN on Main Unit (MU) Reboot
Button C
If button A is selected
Display item change
POWER
BUSY
SETUP
LOCK
RESET
REMOTE CONTROL UNIT
MFR-8RUA
MFR-16RUTA
REMOTE CONTROL UNIT
LOCK
POWER
BUSY
PAGE A
LOCK
SETUP
RESET
PAGE B
4. Press and
hold down
3.
MFR-16RUTA
REMOTE CONTROL UNIT
LOCK
POWER
BUSY
PAGE A
LOCK
SETUP
RESET
PAGE B
3. Press and
hold down
2. Press and
hold down
