56
5-7. Setup Menu (MFR-18RU/18RUA)
The
SETUP
button allows you to enter
Setup Menu
mode, in which RU and MU PC-LAN network
settings are displayed, the MU-PC LAN port can be rebooted, and RU network settings can be
changed. The left three buttons are used to select information to be displayed or select PC-LAN
reboot. To exit
Setup Menu
mode, press the
SETUP
button again.
Selection buttons
(See the figures below)
LAN Port
Display / Execution
Button A
Remote Control Unit (RU)
IP address display and change
Subnet mask display
Button B
PC-LAN on Main Unit (MU)
IP address display
Subnet mask display
Default gateway display
Button C
PC-LAN on Main Unit (MU) Reboot
5-7-1. Displaying Network Settings
To Display RU IP Address and Subnet Mask Settings
Press
SETUP
to enter
Setup Menu
mode. RU IP address and subnet mask settings are
displayed as shown below. (If button A is off (unlit), press button
A
.)
To Display IP address, Subnet Mask and Default Gateway of MU PC-LAN
Press button
B
in
Setup Menu
mode. Network settings are displayed as shown below, in the
order, "IP address, Subnet Mask and Default Gateway."
POW ER
BUSY SETUP
LOCK RESET
MFR-18RU
REMOTE CONTROL UNIT
POW ER
BUSY SETUP
LOCK RESET
MFR-18RU
REMOTE CONTROL UNIT
