FOR-A LTR-200HS7, Operation Manual

Page: 80 / 93

80
No. Symptom Remedial action
5. The cartridge cannot
be mounted and the
“mounting…” dialog
is not displayed.
* If the “LTO driver
has a problem”
message appears,
perform the steps
beginning with (4) as
necessary. (1)
Select “LTO driver maintenance” in the Maintenance Menu
screen to transfer to the LTO Driver Maintenance screen.
(2) E
xecute “Force unmount LTO tape.”
(3)
Return to the LTO Operation Menu screen, select “Mount LTO
tape” again, and try remounting the tape.

If the cartridge is able to be mounted, return to normal
operation.
(4) If the cartridge is still unable to be mounted, shutdown the unit
following the procedure in Sec. 2-3-2. "Turning the Power Off."
(5) Execute " Mount LTO tape " again after the unit reboots.

If it is possible to mount the cartridge, return to normal
operation.
(6) If the problem cannot be remedied, contact the FOR-A Service
Center.
6. The input images are
not displayed in the
LCD screen. (1) If Playback mode is established, change to Recording mode.
(2) Mount an LTO tape, if no tape is mounted.
(3) If the images do not appear in Recording mode either, check
the
display of the “
SDI
” indicator at the bottom left of the
screen. If “
SDI
” is blinking, a mistake may have been made in
the SD/HD image settings.

If HD has been selected as the Encode Profile setting in
the Setting screen, change to SD; conversely, if SD has
been selected, change to HD. (For details on the setting
method, refer to “4-7-2. Recording Settings #2 Screen.”)
Attention: Verify the correct frequency setting.
* If there are no input SDI signals, the SDI field of the Signal status
display in the Setting > Input signal settings screen will be white,
and the Unlock display will appear. If input SDI signals are
present, SDI IN will be displayed in green. If the settings and input
correspond, Lock will be displayed on the left of SDI IN. (For
detai
ls, refer to “4-7-4. Input Signal Settings Screen.”)
(4) If the problem cannot be remedied, contact the FOR-A Service
Center.
7. A file cannot be
opened.

If the file cannot be opened even when an attempt is made to
play back files on the LTO tape:
(1) Switch the mode from playback to recording, and then back
from recording to playback.
(2) Try opening the file again.
(3) If the file fails to open, first unmount the LTO tape, and then
execute Restart GUI on the Maintenance menu.
(4) Mount the LTO tape, and try reopening the file.
(5) If the problem cannot be remedied, contact the FOR-A Service
Center.