54
Change IP Address
Use this item to set
the IP address. When “
Change IP address
” is selected in the
Setup
interface and system
screen, a screen such as the one shown below on the right appears.
Use the [
] and [
] buttons to select an item, and the [
] and [
] buttons or the jog dial to
increase or decrease the values. Use the [
ENTER
] or [
PLAY
] button to confirm
(*1)
the changes.
When the [
MENU
] button is pressed, the
Setup interface and system
screen is restored.
*1 When [
ENTER
] or [
PLAY
] is pressed, a message is displayed. Press the [
ENTER
] button and shut
down the system.
Item
Description
Host name
(*2)
Used to enter a host name.
Obtain an IP address
automatically
Enable
Obtains an IP address automatically.
Disable
Sets IP address and other network settings manually
in the following fields.
IP
(*3)
Used to enter an IP address.
SubnetMask
Used to enter a subnet mask.
DefaultGateway
Used to enter a default gateway.
PrimaryDNS
Used to enter a primary DNS server address.
SecondaryDNS
Used to enter a secondary DNS server address.
*2 Alphanumeric, space, hyphen (-) and under bar (_) characters are available.
*3 Use another address than "192.168.255.xxx." This address is applied to the
LAN1
port.
Use unique host names if multiple LTR recorders are connected via a network.
