58
VTR Control Settings
Set the
Pre-roll time
to more than 5 seconds. A shorter Pre-roll time may cause VTR control
failure.
To set a pre-roll time on recording,
(
*
1)
select "
VTR control settings
" in the
Setup interface
and system
screen to display the
VTR Control Settings
screen as shown below on the right.
Use the [
] and [
] buttons to select an item, use the [
] and [
] buttons or the jog dial to
change the values, and the [
ENTER
] or [
PLAY
] button to confirm changes.
(
*
2)
When the
[
MENU
] button is pressed, the
Setup interface and system
screen is restored.
*1 This setting is enabled only when
REM.1
is set for REMOTE and
IN-OUT
or
IN-DUR
is
selected for REC MODE. (See "5-1-2. Switches") Preroll times from
1 to 10
seconds can
be set.
Network Output Settings
Specifies a network storage location for output recording files
. When “
Network output
settings
” is selected in the
Setup Interface and System
screen, a screen such as the one
shown below on the right appears.
Use the [
] and [
] buttons or the jog dial to select an item. Use the [
ENTER
] or [
PLAY
] button
to enter the item selections. When the [
MENU
] button is pressed, the
Setup interface and
system
screen is restored.
Item
Description
Proxy output settings
Specifies a storage location for proxy files when working with external
databases such as MediaConcierge.
For details, refer to “Proxy
Output Settings
” in the following pages.
NAS output settings
This menu is for optional functions.
Refer to each separate option manual for details on optional functions.
