56
Change Date &Time
Use this item to set the LTR recorder
’s date and time. When “
Change date & time
” is selected
in the
Setup interface and system
screen, a screen such as the one shown below on the
right appears.
Use the [
] and [
] buttons to select an item, the [
] and [
] buttons or the jog dial to change
values, and the [
ENTER
] or [
PLAY
] button to confirm changes. When the [
MENU
] button is
pressed, operation returns to the
Setup Interface and System
screen.
Item
Description
Date
Sets the date manually.
Time
Sets the time manually.
Time Zone
(
*
1)
Sets the time zone.
SNTP
Enables/disables the auto time setting using SNTP (Simple Network Time
Protocol).
Enable
Enables the auto time setting.
The time setting is adjusted at startup or when an SNTP server
connection is established, and is updated every 60 minutes.
Enter an SNMP server name or IP address in the Primary and
Secondary boxes.
Disable
Disables the auto time setting.
*1 To change the Time Zone setting, reboot the unit.
If Time Zone is changed and [
ENTER
] is pressed,
the message as shown at left appears. Press
[
ENTER
] to shut down the unit. To cancel the
operation, press [
MENU
] to return to the
Setup
Interface and System
screen.
