FOR-A HVS-350HS, Operation Manual, Page: 61 / 266

47
7-1-1. Selecting Video Sources on M/E and P/P
Press the desired bus button on the
PGM
bus row. The video signal assigned to the selected
bus button is displayed on the
program output
screen. At the factory default setting, the
PGM bus is the
upper
row and the PST bus is the
bottom
row both in the M/E and P/P bus
sections.
Press the desired bus button on the
PST
bus. The video signal assigned to the selected bus
button is displayed on the
preview output
screen. Then move the fader lever from end to
end to check how the button indication changes as the signals are switched. Once the
transition is complete, the selected signals on PGM and PST are switched (flip-flop).
The switcher's basic operation is to select the next video on the PST bus and send it to air via
transition. And Repeat them again and again.
Users can change the button switching mode for the M/E and the P/P from P/P to A/B. (See
section 7-2. "Button Switching Mode in M/E and P/P bus.")
Button Indication on the P/P and the M/E buses
M/E bus
Red
Indicates that the video is displayed on the P/P program screen.
(Re-entry)
Green Indicates that the video is displayed on the M/E program screen.
Orange Indicates that the video is set to next output on the M/E bus.
P/P bus
Red Indicates that the video is displayed on the P/P program screen.
Orange Indicates that the video is set to next output on the P/P bus.
7-1-2. Selecting Video Sources for AUX Outputs
(1) Press the desired AUX button in the Bus Select section. The button will light up.
(2) Press a desired button on the KEY/AUX bus.
Example1) To Select IN1 for AUX1
Press AUX1. Then press 1 (IN01) on the KEY/AUX.
Example2) To Select M/E PREV for AUX2
Press AUX2. Then press M/E PREV on the KEY/AUX.
See section 10. "KEY and DSK" and section 13. "Picture-in-Picture" for how to select video
sources for KEY, DSK and PinP.
PGM row
PST row
M/E PGM output
M/E re-entry
button
P/P
12 11 10 9 8 7 6 5 4 1 2 3 M/E
M/E 11 10 9 8 7 6 5 4 1 2 3
13
12
14 15 16 17 18 19 20
13 14 15 16 17 18 19 20
PGM row
PST row
P/P PGM output
M/E
P/P
AUX
PREV MV1 CLEAN MV2
2 3 4 5 6 7 8 9 10 11 12 1
KEY/AUX
PGM PREV CLEAN PGM
M/E
2 3 4 5 6 7 8 1
P/P
DSK
2 3 4 1
KEYER
2 1 2
P IN P
1
13 14 15 16 17 18 19 20
Bus selection buttons
KEY/AUX bus