manualshive.com logo in svg

FOR-A HVS-350HS, Operation Manual, Page: 206 / 266

Share
Download
FOR-A HVS-350HS Operation Manual Download Page 206

192

 

29-3. Image Data Transfer 

The HVS-350HS series can send and receive image data used for stills and video clip through 
an Ethernet. The FTP protocol is used for transferring files between the switcher and the computer. 
The main unit works as an FTP server.

 

 
 

29-3-1. Setup Before Connection 

PC Requirements 

An Ethernet port (100BASE-TX/1000BASE-T) and a browser (

Internet Explorer 6.0 or 

higher)

 are required for the personal computer. Any type of computer or OS can be used. In 

this section a  WindowsXP or 7-installed PC is used as an example.  
 

Available Image files 
Image File Format: 

JPEG, TARGA and BITMAP (See the table below.) 

Image Size:

 

Less than 1920x1080 [pixels] 

File Name Format:

  (any file name).jpg, (any file name).tga and (any file name).bmp

 

   

 

Use the three-letter extension after the period. Any length of any 

  

 

characters 

can 

be used for file names. 

 

File Format 

Description 

Limitation (unavailable data) 

JPG 

JPEG Compression data 

Grey-scale image data 

TGA TARGA 

data 

RLE compression data 
Data with Alpha channel (*1) 

BMP 

BITMAP data 

RLE compression data 

(*1) TGA with alpha channel files are available in CPU FPGA version 02-00 or later. 

 
 

Still Directory Structure in the Main Unit 

(Root)

―

 +(still1)

―

 

still.jpg 

still.tga 

still.bmp 

Used for saving STILL1 images in JPEG, TGA and BMP 

format. To send an image file to the switcher, specify this 

directory. 

 

 

 

 

 +(still2)

―

 

still.jpg 

still.tga 

still.bmp 

Used for saving STILL2 images in JPEG, TGA and BMP 

format. To send an image file to the switcher, specify this 

directory.  

 

 

 

 

 +(still3)

―

 

still.jpg 

still.tga 

still.bmp 

Used for saving STILL3 images in JPEG, TGA and BMP 

format. To send an image file to the switcher, specify this 

directory.  

 

 

 

 

 +(still4)

―

 

still.jpg 

still.tga 

still.bmp 

Used for saving STILL4 images in JPEG, TGA and BMP 

format. To send an image file to the switcher, specify this 

directory.  

 

Network Setting 

IP Address 

192. 168.0.10 (default) 

Main unit 

Subnet mask 

255. 255. 255.0(default) 

 

IP Address 

192. 168.0.1 to 192. 168.0.254 

(Do not set the same IP as the main unit) 

Computer 

Subnet mask 

255. 255. 255.0 

 

Refer to the procedure below to open the setting dialog and change the computer network 
settings, if necessary. 

 

Summary of Contents for HVS-350HS











































































































































































































































































Reviews:

No comments