FOR-A HVS-350HS, Operation Manual, Page: 193 / 266

179
EXT I/F : LEVEL : DEST : SRC : : 2/6
ROUTER : =
1 : = 1 : = 2 : :
(6) In the same way, select 2 under
DEST
and 4 under
SRC
.
EXT I/F : LEVEL : DEST : SRC : : 2/6
ROUTER : =
1 : = 2 : = 4 : :
25-2-2. Crosspoint Switches with Bus Buttons (Setup)
Crosspoint switches on the control panel are possible using a user button, AUX buttons (1-8)
in the BUS SELECT block and the KEY/AUX bus buttons. Before switching crosspoints,
these buttons should be set for controlling a router.

Assigning the Router Control ON/OFF function to a User button
(1) Press USER BUTTON on the keypad to display the [USER BUTTON] menu.
(2) Select a desired user button under
SELECT
. The selected button will blink.
(3) Select OTHER under
TYPE
. Press F2 or ENTER on the keypad to confirm the selection.
(4) Turn F3 to select ROUTER ENABLE, and then press F3. The user button allows you to
enable or disable the router control buttons (AUX1 to AUX8 in the BUS SELECT block
and the KEY/AUX bus buttons).
USER :SELECT: TYPE : FUNC(F3)
BUTTON : =
OU-1 : = OTHER : = ROUTER ENABLE

Assigning Destinations and Sources to Buttons
(1) Open the [SETUP-EXT I/F-ROUTER] (1/6) menu.
(2) Select a button under
DST BTN
from AUX1 to AUX8.
(3) Select a destination channel to be assigned to the button.
(4) Repeat steps (2) and (3) to assign destinations to other buttons.
EXT I/F :DST BTN:DST CH :SRC BTN:SRC CH : 1/6
ROUTER : =
1 : = 1 : =1 : =1 :
(5) Select a button on the KEY/AUX bus under
SRC BTN
.
(6) Select a source channel to be assigned to the button.
(7) Repeat steps (5) and (6) to assign sources to other buttons.
EXT I/F :DST BTN:DST CH :SRC BTN:SRC CH : 1/6
ROUTER : =1 : =1 : =
1 : = 1 :

Selecting a Level
(1) Open the [SETUP-EXT I/F-ROUTER] (2/6) menu.
(2) Turn F1 to select a level under
LEVEL
.
EXT I/F : LEVEL : DEST : SRC : : 2/6
ROUTER : =
1 : =1 : =1 : :