Home
/
FOR-A
/
HVS-350HS
/
Operation Manual

FOR-A HVS-350HS, Operation Manual, Page: 156 / 266

Share

Page: 156 / 266

FOR-A HVS-350HS Operation Manual Download Page 156

142

19-3. Saving Data to USB Flash Memory

This section explains how to save panel settings to USB memory by using a "data.all" file as an
example.

(1) Insert a USB flash memory into the USB port.
(2) Press the MENU control button, then press the FILE button to open the FILE top menu.
(3) Turn F1 to select SAVE, and then press F1 or the page down button to open the

[FILE-SAVE] menu.

FILE :>LOAD >

SAVE

>UPDATE

TOP :

(4) Turn F1 to select ALL to the

EXT

(File Extension) item.

(5) Turn F3 to select data. (See section 19-5 "Moving between Directories in the USB Flash

Memory.") Press F3 to save the data to the USB memory.

FILE : EXT : CTRL : DATA.ALL :1/1
SAVE : =

ALL

: =SAVE : 101MB

(6) When the data is sent to the flash memory, the message "SAVE?" will appear. Press F3

again to store the data to the flash memory. A "beep" sound will be heard when the data is
saved.

If the same file exists in the USB flash memory:

A pop up window appears and asks if you would like to overwrite the existing file. Turn F3 to
select CANCEL, OVERWR(overwrite) or RENAME.

To Rename the File:

If you wish to rename the file to save it, turn F3 to select RENAME and refer to section 19-7.
"Renaming Files in the USB Flash Memory" to give a new name to the file.

IMPORTANT

When pressing a control push-button, press it down lightly and release it within 1 sec.
Note that if you press and hold a control button down for more than 1 sec., the related
operation will be cancelled. Do not remove the USB flash memory while the access
lamp is flashing. This could corrupt the stored data or damage the USB flash memory.

«
...
154
155
156
157
158
...
»

Summary of Contents for HVS-350HS











































































































































































































































































Reviews:

No comments