manualshive.com logo in svg

FOR-A HVS-350HS, Operation Manual, Page: 159 / 266

Share
Download
FOR-A HVS-350HS Operation Manual Download Page 159

145

 

19-7. Renaming Files in USB Flash Memory 

The user can input an identifying name of up to 16 alphanumeric characters for any file stored to 
USB flash memory. Existing files can also be named / renamed using the following procedure. 

 

(1) Open the [FILE - LOAD] menu. If you are in the [FILE-SAVE] menu, press the page up button 

to go to the FILE top menu and move to the [FILE-LOAD] menu. 

(2) Press the page down buttonto go to the [FILE-LOAD-DATA] menu. 
(3) Turn F1 to select the extension of the file you wish to rename in the displayed file list. 
(4) Turn F2 to select RENAME. 
(5) Turn F3 to select which file you wish to rename in the displayed file list. 
(6) Press F2 to start renaming  
(7) Press F3 to select the character to be changed in the selected file. Turn F4 to change the 

currently chosen character. 

 

FILE    : EXT   : CTRL            

STILL1

 2/2  

DATA    : =JPG  : =RENAM: SELECT: CHARA: 101MB 

 

(8) (Repeat  steps 

(7)

 to change each character in the name of the selected file. 

(9) When all needed characters are input, press F2. A "beep" sound will be heard when the 

changed name is saved as the new file name. 

 

Summary of Contents for HVS-350HS











































































































































































































































































Reviews:

No comments