The
BALI RTFS
is a boiler with a
high performance heat-exchange
casing that works with gas burners
at atmospheric pressure. The follo-
wing models are available:
BALI RTFS E 18
with a thermal
power rating of 18 kW.
BALI RTFS E 24
with a thermal
power rating of 24 kW.
BALI RTFS E 32
with a thermal
power rating of 32 kW.
BALI RTFS E 36
with a thermal
power rating of 36.5 kW.
BALI
boilers can be supplied in a
PV
version, which means that they have
a circulation pump and an 8 lit.
expansion tank.
BALI
boilers meet the essential
requirements laid down in EEC
Directives for this product and Gas
Directive 93/396/EEC dated 29th
June 1990,
Performance Directive 92/42/EEC
dated 21st May 1992.
EMC Directive 89/336/EEC dated
3rd May 1989, as amended by
Directive 92/31/EEC dated 28th April
1992,
European Community Low Voltage
Directive 73/23/EEC dated 19th
February 1973, as amended by
Directive 93/68/EEC dated 22nd July
1993, and is fitted with all the safety
devices called for in the current stan-
dards for this type of product.
The main technical characteristics of
the
BALI
boiler are listed below.
• High-performance cast iron heat
exchanger.
• Insulation in glass wool with thick
aluminized paper (50 mm).
• Bodywork in electrically galvani-
sed steel plating, epoxy-polyester
powder coated.
• Lit main switch.
• LED indications for: power on,
heating pump operating, burner ope-
rating, excess temperature cut-out,
burner cut-out.
• Heating temperature selector
(45/85°C).
• Safety limit thermostat (110°C).
• Smoke pressure switch
• Thermometer/Pressure Gauge
• System drain stopcock.
• Electrical system with printed elec-
tric circuit.
• Provision for electrical connection
for a heating pump.
• Provision for an electrical collec-
tion for a safety pressure switch to
guard against insufficient water.
• Provision for connecting up a card
for managing a remote boiler (optio-
nal kit).
• Provision for connecting up a cli-
matic unit (optional kit).
• Provision for connecting up a card
for managing three heating areas
(optional kit).
• 8 lit expansion tank (for PV
models).
• Single-speed circulation unit (for
PV models).
2. TECHNICAL CHARACTERISTICS AND DIMENSIONS
2.1 Technical Characteristics
6
