General Lit Switch (Green) (1)
When the switch is in the 0 position
the boiler is switched off and the
switch is not lit.
When the switch is in the I position
the boiler is switched on and the
switch is lit.
Reset Button (2)
When the reset button is pressed
the boiler is restarted.
Temperature adjustment for the
heating water (3)
This knob is used to set the tempe-
rature for the water in the heating
system.
It can be set between a
minimum of 45°C and a maximum of
85°C.
Heating Function LED (Yellow) (4)
This LED indicates that the system
is calling for heating.
Excess Temperature Cut-Out LED
(Red) (5)
This light indicates that the cut-out
connected to the safety thermostat
has tripped due to malfunctioning. It
must be reset manually.
Burner cut-out LED (Red) (6)
This light indicates that the burner
safety device has tripped due to a
malfunction.
Burner operation LED (Yellow) (7)
This light indicates that the burner is
operating.
Thermometer/Pressure Gauge (8)
The thermometer/pressure gauge’s
function is to display the temperatu-
re and pressure of the water in the
boiler.
Manual excess temperature cut-
out reset (9)
The thermostat reset button can be
accessed by removing the protective
cover. The safety thermostat is used
to protect the boiler in case of a fault.
1. INSTRUCTIONS FOR THE USER
1.1 CONTROL PANEL
4
1
. General switch with line light (Green)
2
. Reset Button
3
. Temperature adjustment for the heating water
4
. Heating Pump operation light (Yellow)
5
. Excess Temperature Cut-Out LED (Red)
6.
Burner cut-out LED
7
. Burner operation LED (Yellow)
8
. Thermometer
9
. Safety thermostat-reset manually.
fig. 1