background image

This INSTRUCTION BOOKLET is an
integral and essential part of this pro-
duct and must be handed to the user
by the installer for safekeeping and
consultation when necessary.

This

instruction booklet is to be handed
over with the equipment should it be
sold or transferred.

The boiler must only be used for
the purposes that are expressly
foreseen. Any other use is to be
considered improper and therefo-
re dangerous.

The installation must be carried out in
compliance with current standards
and following the manufacturer’s
instructions contained in this booklet.
Incorrect installation may result in
harm to people, animals, and/or pro-
perty, and the manufacturer accepts
no responsibility for such damage.

The unit must be installed in a
room that is sufficiently well venti-
lated, in compliance with current
standards and laws.

FONDITAL does not accept any con-
tractual or extra-contractual responsi-
bility for any damage caused due to
errors in installation or operation, or
resulting from failure to follow the
instructions below.
Before installing this equipment make
sure that the technical data for the
unit meet the requirements for its pro-
per use in the plant.
Also check that the equipment is
complete and that it has not been
damaged in transit or during hand-
ling. Do not install any equipment that
is clearly damaged and/or defective.
For all equipment with optional extras
or kits (including electrical items),
only original accessories must be
used.
When installing the equipment do not
throw the packing away. All the mate-
rials can be recycled and must be
taken to specific separated collection
areas.
Keep the packing out of reach of chil-
dren, as, by its very nature, it may
constitute a source of danger.
Should the equipment break down
and/or function defectively, switch it
off and do not attempt to repair it
yourself. Call in only qualified per-
sonnel.
Any repairs to this product must be

made using only original spare parts.
Failure to comply with the above may
compromise the safety of the equip-
ment and expose people, animals,
and property to danger.

The owner is obliged to have routi-
ne maintenance carried out on the
equipment once a year, as indica-
ted in the programme given in the
relevant section of this booklet, in
order to ensure that it works effi-
ciently and correctly.

Where the equipment is not to be
used for an extensive period of time,
disconnect it from the electrical
power supply and shut the fuel stop-
cock.
Where there is a danger of freezing,
add antifreeze. Draining the system
is not recommended as this may
damage the overall system. For this
purpose use non-freeze products
specifically made for multi-metal hea-
ting equipment.

IMPORTANT

For equipment powered by gas fuel, if
the smell of gas is sensed in the area,
proceed as follows:

- Do not activate any electrical
switches or start any electrical
equipment.
-  Do not light any flames and do
not smoke.
- Shut the central gas stopcock.

-  Open all doors and windows.
-  Contact a Service Centre, quali-
fied installer, or the gas supply
company.
Using naked flames to check for
gas leaks is completely forbidden.

2

GENERAL NOTES FOR THE USER AND THE INSTALLER

WARNING

This 

BALI

unit is built for installation in the destination

Country specified on the technical data plate.

Installation in any country other than that indicated
may pose a danger to people, animals, or property.

Summary of Contents for BALI RTFS E 18

















Reviews: