152
Reference
4
S register
S register
Overview
Parameter
S0
Setting number of rings before automatic call
receiving starts
Sets number of rings (calls) before FOMA terminal's
automatic call receiving starts. When 0 is specified, no
automatic call receiving is performed. This command
setting is available for 64K data communication,
videophone communication and packet communication.
*1
ATS0=0: No automatic
call receiving (default)
ATS0=n: Automatic call
receiving starts after the
specified number of
rings (n=1 to 255)
S2
Setting escape character
Sets escape character. When
"n=127"
sets, escape
function is disabled.
ATS2=n: n=0 to 127
(default: n=43)
S3
Setting recovery (CR) character
Defines character to be recognized as the end of an AT
command. It is attached at the end of command string
echoed back and result code. The specified value cannot
be changed.
ATS3=n
(default: n=13)
S4
Setting line feed (LF) character
To display result code in English, add it after the [CR]
characters. The specified value cannot be changed.
ATS4=n
(default: n=10)
S5
Setting back space (BS) character
When this character is detected while entering an AT
command, the last character of the input buffer is deleted
from the input buffer. The specified value cannot be
changed.
ATS5=n
(default: n=8)
S6
Setting pause time (in seconds) before dialing
This command sets register, but no operation with this
setting value is performed.
ATS6=n: n=2 to 10
(default: n=5)
S7
Setting wait time (in seconds) before termination of
connection
If "CONNECT" cannot be sent to the PC even though the
specified period of time (in seconds) has past after the
FOMA terminal received the ATD input from the PC, "NO
CARRIER" result code is returned and disconnection
operation starts. If the value is set to "121" to "255", "OK"
result code is returned but the value is set to "120".
*1
ATS7=n: n=1 to 255
(default: n=60)
S8
Setting pause time (in seconds) by comma dial
This command sets register, but no operation with this
setting value is performed.
ATS8=0: No pause
ATS8=n: Pause time
(n=1 to 255)
(default: n=3)