background image

106

 

F2402 Utility Operation

About Display on Task Tray

This section describes about icons to appear on the task tray.

Icons to appear

Status

 

The FOMA terminal is not connected to the PC.

 

Since the utility features are turned off, receive level and 

communication status cannot be displayed and made/

received a call.

 

The FOMA card cannot use.

Indicates that no FOMA card is inserted, the inserted FOMA 

card malfunctions or the card is disabled after a wrong PUK 

has been input 10 times in a row.

 

Waiting for PUK or PIN code entry.

Refer to "Display of received signal level" in P.107

 

During 64K data communication (The antenna changes 

depending on the status of radio wave.)

 

During 32K communication with videophone (The antenna 

changes depending on the status of radio wave.)

 

During 64K communication with videophone (The antenna 

changes depending on the status of radio wave.)

 

During packet communication (The antenna changes 

depending on the status of radio wave.)

 

During voice communication (The antenna changes 

depending on the status of radio wave.)

 

During multiaccess (The antenna changes depending on the 

status of radio wave.)

  Animations are displayed while voices are received. (The 

antenna changes depending on the status of radio wave.)

Summary of Contents for F2402













































































































































































Reviews: