FOLSOM ScreenPro SPR-2000 Installation And Operator'S Manual Download Page 14 | Manualshive

Page: 14 / 83

background image

Manual # 26-0002901-00 / Revision H ScreenPro - High Resolution Seamless Switcher

2

Introduction

About the ScreenPro

TM

The ScreenPro

TM

High-Resolution Seamless Switcher is designed to simplify the task of supporting

professional-quality video presentations. The unit combines a video router, two video scalers, and a full-
featured control panel in a single integrated package. ScreenPro

TM

has eight universal inputs that accept

composite video, s-video, component, and computer video sources (640x480 VGA to 1600x1200 UXGA).
The input video is converted directly to the native resolution of the projection device to optimize image
quality.

ScreenPro

TM

is ideal for use whenever multiple video sources must be switched to provide a professional-

quality presentation. The operator can transition seamlessly between any of the eight different input sources.
Typical applications include live staging events, corporate boardroom presentations, educational and
training events. ScreenPro

TM

is also designed to be compatible with Folsom’s ScreenPro PLUS

TM

product

line to support fully-integrated multi-screen events.

Attention to the Installation and Operation Sections of this manual is important to ensure trouble-free
operation. Should you have any questions regarding the operation of this unit, please consult the factory.

Features

The ScreenPro

TM

provides and offers the following features:

•

Eight high-resolution inputs accommodate composite (NTSC/PAL), s-video, component, and computer video
sources

•

High bandwidth (five-wire) 8:2 video router

•

Motion adaptive de-interlacing

•

Automatically syncs to input videos with resolutions from 640x480 to 1600x1200

•

High-performance dual-scaler architecture supports seamless switching

•

Transition effects include cuts, fade, dissolves, and wipes (transition duration is programmable)

•

Video Mixing and Graphics Overlay using

Luminance Keying

.

•

Picture in Picture Capability

•

Superior image quality

•

Intuitive user interface simplifies setup

•

Re-configurable RS-232/485 port for remote control

•

User programmable output formats: VGA (640x480), SVGA (800x600), XGA (1024x768), 1024x768 II,
SXGA (1280x1024), (1280x720), (1280x768), (1365x768), (1365x1024).

•

Stores pre-programmed sequences (up to 64 steps) to support scripting of shows

•

Compatible with Folsom ScreenPro PLUS

TM

to support multi-screen events

«
...
12
13
14
15
16
...
»

Summary of Contents for ScreenPro SPR-2000




















































































Reviews:

No comments

Related manuals for ScreenPro SPR-2000

EasySmart DGS-1100-08

Brand: D-Link Pages: 44

Brand: pathway Pages: 28

Brand: GE Pages: 302

PARAGON II Series

Brand: Raritan Pages: 1

Paragon Manager

Brand: Raritan Pages: 117

Brand: Sams Pages: 10

Brand: DITEC Pages: 8

Brand: Datavideo Pages: 64

Brand: Cypress Pages: 16

Brand: TRENDnet Pages: 2

Brand: Black Box Pages: 4

Brand: Minicom DX Pages: 36

Tek-CARE NC554/8

Brand: TekTone Pages: 2

Brand: LevelOne Pages: 15

Brand: Cabletron Systems Pages: 105

Brand: Intellinet Pages: 12

Brand: A SYSTEMS Pages: 80

Brand: Scion-Tech Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands